‎10-27-2013 They can do that remotely. ‎04-11-2015 04:52 PM 10:50 AM You can now choose which rules (the creation of which is described in the, With the settings defined to your liking, scroll to the bottom of the page and click, Directly connecting your computer and modem, How to change the wireless network name (SSID), How to Change Your Wireless Network Password, Hardware Information - Cisco DPC3825 Internet Modem, How to change your wireless network password. You can choose to block access based on specific days and times. The new rule should appear in the drop-down menu and you can select the rule to confirm its proper creation. I use my Linksys wireless-G 2.4 Ghz 54 Mbps router instead of the cisco as was recommened on this board. ), ‎04-07-2015 If you find this a little daunting you can call tech support and ask the CSR to check the signal levels on the cable. 10:58 AM ‎04-11-2015 Related: How to log in to your Shaw WiFi modem. Before enabling WDS, please set the "Wireless Configuration" to "Manual" and the "Wireless Security Mode" to "WEP" on the Wireless Security page. - last edited on Basic Settings Cisco DPC3825 DOCSIS 3.0 Gateway DPC3825 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Log OFF Basic Settings Wireless Security MAC Filter Advanced Settings WDS Settings QoS Basic Settings Help... Wireless Network: Enable Disable Wireless Configuration: Manual Wi-Fi Protected Setup Network Mode: G Only B/G Mixed Mixed Radio … 03:09 PM (All this is assuming that the slow downs, etc are not being caused by interfearance, etc), ‎04-07-2015 Password: You can find the default password printed on the white sticker on your Shaw wireless modem (Cisco DPC3825), referred to as the Passphrase. It SHOULD work, but there isn't any guarantees. In the end, speed, etc shoulddnt really be different between the two setups. In access point setup you will Definitely want to disable the built in wireless as you don't want the signals to overlap and cause interference if they are sitting close to each other. Anyone have any suggestions on how to improve the internet? I have several questions regarding the 2 different set up options: -Does one option provide a stronger signal strength over the other? ‎04-11-2015 Open each device's WiFi settings. With the timing defined to your liking, scroll to the bottom of the page and click. ‎04-07-2015 It is installed in the basement with the rest of the household wiring infrastructure. ‎10-27-2013 How to set Parental Controls on a Cisco DPC3825 Sh... How to set Parental Controls on a Cisco DPC3825 Shaw wireless modem. 12:46 PM Type in a name for the new rule set and then click, To create a new time-based rule you need to start by giving the rule a name. A parental control rule is the name for a set of conditions, blocks, and access controls that allow you to define a distinct keyword or website that you would like to have blocked from access. by Enter your network password.